Capacity & Ranges
Manufactured from Stainless Steel the Flueboost 350 will handle flue gases up to 300°C with heat outputs up to 350,000 Btu/h (102Kw). Based on Normal Secondary flue temperatures of the average gas appliance working at 75% efficiency are 180°C with a CO² content of 5%.
The fan has a built in variable pre-purge (time delay) and post purge of approximately 30 seconds to 3 minutes, this is to purge the boiler of any gases before ignition.
The pressure switch has contacts which close with air flow and open in the event of a fan failure. The pressure switch has an interlock installed which ensures a fail safe operation.
A plug-in electrical connector is supplied which is a multi-pin connector fitted with a five core lead, the five cores are colour coded to the following:-
Brown = Permanent Live
Blue = Permanent Neutral
Green & Yellow = Earth
Black & White = Switch Live from Thermostat to Fan
Black = Switch Live from Fan to Boiler.
The output supply is 220/240 volt with live only.
Electrical & Sound Details
220/240 Volt Single Phase Input/Output
Starting Current 0.9Amp
Running Current 0.51Amp
Sound Level 64dba @ 3 Metres
This item is shipped direct from the manufacturer.