Schiedel Chimney Systems

This item is a commonly used Schiedel Gas Flex Pack and contains the following items:- 1 x 10M (33ft) Schiedel Triplelock Gas Flex 316 stainless steel flue liner 1 x FGC Economy Gas Terminal 1 x...

This Installation Pack is used when you want to remove the existing chimney pot and then replace the pot during the flue liner installation. Its normal practice to install an additional bird guard or...

This Installation Pack is used when you want to remove the existing chimney pot or the chimney stack doesn't not have a chimney pot already fitted. The Pack Comprises of: 1 x Top Plate...

This Installation Pack is used when you DO NOT want to remove the existing chimney pot, the liner is suspended from the screwfit pot hanging cowl. The Pack Comprises of: 1 x Screwfit...

1460mm Effective Lengths are used to make up spaces in order for the system to operate. The chimney flue pipe lengths can be applied either vertically or horizontally. The shorter chimney pipe...

Tecnoflex 316 Flue Liner is a twin skin flexible flue liner manufactured with a 316 grade stainless steel inner skin and a 316 grade stainless steel outer skin. Both inner and outer...

This 45 Degree Bend component is used to create an offset of 45° , or this can be used with other elbow components to create a bigger offset. NCC stock a wide range of high quality...

The range of 904 grade flue liner products we offer consist of adaptors, support components and terminals. 904 grade liner is the highest quality liner available. TecnoFlex liners are of...

This Adjustable Pipe is used with standard component’s to achieve an exact length on site and helps avoid cutting pipe. This pipe can also be used in starter sections to remove the appliance...

95510180 Aluminium Base and Aluminium Upstand Flashing Kit Stainless Steel Storm Collar Supplied as Part of Kit Designed for Flat Tiles or Slates Suitable for Roof Pitches Between 5° and 45°

Manufactured from Cast Aluminium for use on top of an existing smoke tested chimney stack to prevent ingress of rain water and birds from nesting.  The chimney cowl is a heavy duty type for use...

Manufactured from Galvanised Steel this product is used at the base of an existing chimney stack to prevent any debris/mortar from fall down the stack and landing onto of the gas appliance...

Manufactured from Aluminium this product is used at the top of an existing chimney stack to prevent any ingress of rain water or birds nesting.  This item can be connected onto an existing...

95530180 Aluminium Base and Aluminium Upstand Flashing Kit Stainless Steel Storm Collar Supplied as Part of Kit Designed for Flat Felt Roofs or Sarnafil Roofs Suitable for Flat Roofs Only

This product is manufactured from stainless steel and is used to terminate a multifuel flexible flue liner to offer protection against the ingress of rainwater.  This raincap cowl is used when...

4044122125/110363Prima Plus is a single wall flue manufactured from 316L grade stainless steel and is commonly used for connecting the appliance to the chimney. Material Thickness:- 0.6mm...

4046098125/110602Prima Plus is a single wall flue manufactured from 316L grade stainless steel and is commonly used for connecting the appliance to the chimney. Material Thickness:- 0...

The ICID Insulated Appliance Connector is used to push into the appliance spigot with the male collar pointing upwards. It is used on solid fuel appliances and is sealed to the appliance with fire...

4044122125/110363Prima Plus is a single wall flue manufactured from 316L grade stainless steel and is commonly used for connecting the appliance to the chimney. Material Thickness:- 0.6mm...

 Prima Plus is a single wall flue manufactured from 316L grade stainless steel. Suitable for use on Tecnoflex flue liners Push Fits into the internal of Flue Liner Secured to Liner using...

This item is used to terminate the system and also prevents ingressive rain entering it. It has a number of features: Twist-lock bayonet jointing system. Low external case temperature. ICID...

The Recessed Flue Box is designed with the spigot at the rear, for use on larger radiant and decorative gas fires for gas fires to BS 7977-1. Features and Benefits Aluminium → Durable BS...

Round Ventilated Firestop Plates 1PC  ICS Firestop components. ICS is converted into ICS Plus by adding a lip seal to each of the components with a male form on the liner. This creates a twin...

The Schiedel ICID SW-DW Adjustable Starter Section is to be used with a Schiedel Prima Smooth section to allow movement directly off the top of the stove to accept expansion and offer the...

220297 This item is generally used to fix Stove Pipe or Twin Wall Flues together as an additional fixing.Screw Pack 1 consists of:- Colour = Black 20 x A2 3.5mm x 12mm Self Tapping Screws 1 x HSS...

220295This item is generally used to fix Stove Pipe or Twin Wall Flues together as an additional fixing.  Screw Pack 1 consists of:- Colour = Stainless 20 x A2 Stainless Steel 3.5mm x 12mm Self...

220296 This item is generally used to fix Stove Pipe or Twin Wall Flues together as an additional fixing. NCC only stocks the very best in flue supplies and fixings so you can be sure your always...

This item is designed for use with radiant and decorative gas fires complying to BS 7977-1. It is constructed with an aluminium liner and coated steel outer case. Features and Benefits Aluminium...

4013100/124679Prima Plus is a single wall flue manufactured from 316L grade stainless steel and is commonly used for connecting the appliance to the chimney. Material Thickness:-...

4046122125/110585Prima Plus is a single wall flue manufactured from 316L grade stainless steel and is commonly used for connecting the appliance to the chimney. Material Thickness:- 0...

Adjustable Telescopic Pipes are used with standard components to achieve an exact length on site and avoid on-site cutting of components. This length could also be used in starter sections to remove...

Adjustable Telescopic Pipes are used with standard components to achieve an exact length on site and avoid on-site cutting of components. This length could also be used in starter sections to remove...

4044122125/110363Prima Plus is a single wall flue manufactured from 316L grade stainless steel and is commonly used for connecting the appliance to the chimney. Material Thickness:- 0...

This Trade Pack 1 Consists of:- 4 x 10m Roll of 5" (125mm) Schiedel Tecnoflex Plus 316L Flexible Flue Liner 4 x 5" Screwfit Stove Pipe to 5" Flex Adaptor 4 x 5" Screwfit Terracotta Pot Hanging...

This Trade Pack Consists of:- 1 x 10m Roll of 5" (125mm) Schiedel Tecnoflex Plus 316L Flexible Flue Liner 1 x 5" Screwfit Stove Pipe to 5" Flex Adaptor 1 x 5" Screwfit Terracotta Pot Hanging...

Manufactured from Aluminium this product is used at the top of an existing chimney stack to prevent any ingress of rain water or birds nesting. This item is used in conjunction with a Schiedel...

Manufactured from Aluminium this product is used at the top of an existing chimney stack to prevent any ingress of rain water or birds nesting.  This item is used in conjunction with a...

Manufactured from Stainless Steel this product is used at the top of an existing chimney stack to help prevent downdraught, ingress of rain water and birds nesting. This item can used in...

1 Piece Trim Collar 45 Degree are fitted around the Eco ICID pipe where it protrudes through both the inside and the outside of the wall at 45 degrees. They provide a more aesthetic finish when...

This 135° Tee including Drain Cap is used in combination with a 45 degree elbow to connect from the connecting flue pipe to the vertical chimney. It provides the least resistance to the flow of...