Twin Wall Flue Systems
Twin wall flues are insulated chimney systems for open or closed solid fuel stoves, condensing and oil fired appliances. They can withstand continuous operating temperatures of up to 450°C and are perfect for wood burning stoves, gas coal effect fires and oil boilers. Great for new build and renovation projects as they are a simple and cost effective solution for those without a brick chimney stack or an existing chimney stack, so you can install a stove in any room. Check out our article on fitting a twin wall system.
-
Anti-downdraught Terminal
Schiedel
£114.46 Inc. VAT£95.38 Ex. VATThis item is used to terminate an installation and provides protection to avoid rainwater from entering the chimney system, whilst minimising problems associated with downdraught. Care should be taken to ensure that the chimney is cleaned regularly...£114.46 Inc. VAT£95.38 Ex. VAT -
750mm Effective Length
Schiedel
£118.10 Inc. VAT£98.42 Ex. VATEffective Chimney Pipe Lengths are used to make up spaces in order for the system to operate. The chimney flue pipe lengths can be applied either vertically or horizontally. The shorter chimney pipe lengths are great for making up spaces in tight room...£118.10 Inc. VAT£98.42 Ex. VAT -
Tee Plug with Drain
Schiedel
£48.60 Inc. VAT£40.50 Ex. VATThis item is used at the base of the vertical chimney to provide a drain off point for rainwater and condensate. It also provides inspection or cleaning access. It may be used in both dry and wet conditions and on both positive and negative pressure...£48.60 Inc. VAT£40.50 Ex. VAT -
Double Wall Adjustable Starter Section with Test Point (600mm)
Schiedel
£137.29 Inc. VAT£114.41 Ex. VATDouble Wall Adjustable Starter Section with Test Point (600mm) are use to connected directly to the top of the stove spigot, this item offers a small adjustment to allow the stove to be removed without having to dismantle the entire flue system...£137.29 Inc. VAT£114.41 Ex. VAT -
Double Wall Adjustable Starter Section with Test Point (1037mm)
Schiedel
£203.35 Inc. VAT£169.46 Ex. VATDouble Wall Adjustable Starter Section with Test Point (1037mm) are use to connected directly to the top of the stove spigot, this item offers a small adjustment to allow the stove to be removed without having to dismantle the entire flue system...£203.35 Inc. VAT£169.46 Ex. VAT -
SW-DW Starter Section (Long)
Schiedel
£177.08 Inc. VAT£147.57 Ex. VATSW-DW Starter Section (long) is to be used to connect from a standard stove pipe or Prima Smooth connecting pipe. This item must NOT be connected directly to the stove spigot/outlet. 316L Grade Stainless Steel Liner Corrosion...£177.08 Inc. VAT£147.57 Ex. VAT -
External Fix Wall Band with Extension 95mm-450mm
Schiedel
£121.12 Inc. VAT£100.93 Ex. VATThe External Fix Wall Band with Extension 95mm-450mm is used to fix the flue pipe to a supporting wall in twin wall flue set ups and provides lateral support at an adjustable distance of 95mm-450mm. The unique design allows the installer...£121.12 Inc. VAT£100.93 Ex. VAT -
SW-DW Adjustable Starter Section (Short)
Schiedel
£142.76 Inc. VAT£118.97 Ex. VATSW-DW Adjustable Starter Section (Short) is to be used with a Schiedel Prima Smooth section to allow movement directly off the top of the stove to accept expansion and offer the facility to remove the stove by simply sliding the Prima Smooth Pipe up...£142.76 Inc. VAT£118.97 Ex. VAT -
Rectangular Ventilated Firestop Plate - 2 Piece
Schiedel
£56.26 Inc. VAT£46.88 Ex. VATRectangular Ventilated Firestop Plate – ICS Firestop components. ICS is converted into ICS Plus by adding a lip seal to each component with a male form on the liner. This creates a twin wall insulated chimney system designed for the new...£56.26 Inc. VAT£46.88 Ex. VAT -
90 Degree Bend
Schiedel
£143.77 Inc. VAT£119.81 Ex. VATThis 90 Degree Bend is used in pairs to provide an offset of 30° 90 Degree Bend Features Twist-lock bayonet jointing system. Fast inter fit with ICID System Chimney. Low external case temperature. Suitable for use on solid fuel appliances...£143.77 Inc. VAT£119.81 Ex. VAT -
Dragon Self Rotating Cowl
£255.00 Inc. VAT£212.50 Ex. VATA Dragon Self Rotating Cowl is suitable to be installed within an existing twin or single wall flue system using the specially designed "Push Fit" system. The Dragon Cowl always rotates and places itself in the opposite direction to the...£255.00 Inc. VAT£212.50 Ex. VAT -
460mm Effective Length
Schiedel
£102.11 Inc. VAT£85.09 Ex. VAT460mm Effective Length are used to make up spaces in order for the system to operate. The chimney flue pipe lengths can be applied either vertically or horizontally. The shorter chimney pipe lengths are great for making up spaces in tight room areas...£102.11 Inc. VAT£85.09 Ex. VAT -
Insulated Tee Plug with Drain
Schiedel
£118.10 Inc. VAT£98.42 Ex. VATThis Insulated Tee Plug with Drain is used at the base of the vertical chimney to provide a drain off point for rainwater and condensate. It also provides inspection or cleaning access. It may be used in both dry and wet conditions and on both...£118.10 Inc. VAT£98.42 Ex. VAT -
Top Plate
Schiedel
£122.94 Inc. VAT£102.45 Ex. VATThe top plate ICID plus is designed to be used internally or externally to provide either initial or intermediate support for the vertical chimney. It is used in combination with side plates or with cantilever brackets. Top...£122.94 Inc. VAT£102.45 Ex. VAT -
2 Piece Trim Collar 45 Degree
Schiedel
£45.38 Inc. VAT£37.82 Ex. VATThe trim collars are used to give an aesthetic finish where the chimney penetrates the wall of a building. The 45 version should be used in combination with a 45 tee connection. NCC only stock the very best chimney and flue components so you can be sure...£45.38 Inc. VAT£37.82 Ex. VAT -
Retrofit Wall Support 60mm-200mm
Schiedel
£108.44 Inc. VAT£90.37 Ex. VATThis Retrofit Wall Support 60mm- 200mm is exceptionally easy to install, comes with a Lifetime Guarantee, but also saves up to £120 on a typical Ø150 4.5 m bungalow installation using standard black painted components...£108.44 Inc. VAT£90.37 Ex. VAT