Flue Pipe
Flue pipe, also known as chimney pipe, stove pipes or vitreous enamel pipe is a pre fabricated single wall stove pipe. Made with great attention to detail to meet industry standards. The pipe is made from 1.2mm thick low carbon steel, a material chosen for its strength and durability at high temperatures. You can fit various flue pipe lengths into the chimney system.
Each vitreous enamel pipe component is coated on the inside and outside with a ground coat, then a high temperature acid resistant top coat and flexible flue liner. The double coating process not only protects the pipe from use but also the finish. The chemical make up of the steel used for the stove pipe creates a perfect surface for the glass to stick to, resulting in a finish that out performs other manufacturers.
-
Pennine One Increaser
£43.74 Inc. VAT£36.45 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One Increaser is designed to increase / step up to the next diameter flue system, this item can be used directly on the top of the stove spigot or into a cut piece of stove pipe...£43.74 Inc. VAT£36.45 Ex. VAT -
Pennine One Continental Stove Adaptor
£49.74 Inc. VAT£41.45 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One Continental Stove Adaptor is designed to fit into the top or rear of certain imported stoves which have been imported from Europe and have an odd size flue connection on them...£49.74 Inc. VAT£41.45 Ex. VAT -
1 Piece Offset (100mm)
£92.71 Inc. VAT£77.26 Ex. VATThis 1 Piece Offset (100mm) is a single wall prefabricated pipe designed to give an aesthetically pleasing offset rather than individual parts. This is will offset the stove pipe by 100mm (4") centre to centre. Its manufactured and coated to...£92.71 Inc. VAT£77.26 Ex. VAT -
600mm Standard Pipe No Door
£59.95 Inc. VAT£49.96 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£59.95 Inc. VAT£49.96 Ex. VAT -
135° Swept Elbow No Door
£77.50 Inc. VAT£64.58 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£77.50 Inc. VAT£64.58 Ex. VAT -
Pennine Wall Band (280mm Long)
£53.56 Inc. VAT£44.63 Ex. VATThe Pennine Systems flue pipe wall band is used along a wall to provide clearance and stability of the stove pipe. Wall bands are used to provide lateral support for your chimney flue system, the installer must cut the wall band down to suit...£53.56 Inc. VAT£44.63 Ex. VAT -
Spun Increasing Adaptor
£45.35 Inc. VAT£37.79 Ex. VATOur Spun Increasing Adaptors are manufactured in accordance with ISO9001-2008 using 1.2mm low carbon steel. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products have an internal and external vitreous enamel...£45.35 Inc. VAT£37.79 Ex. VAT -
Adjustable Pipe No Door 350mm-550mm
£73.57 Inc. VAT£61.31 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£73.57 Inc. VAT£61.31 Ex. VAT -
Continental Stove Adaptor
£51.58 Inc. VAT£42.98 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£51.58 Inc. VAT£42.98 Ex. VAT -
Pennine One 30° Bend No Door
£45.61 Inc. VAT£38.01 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 30° NO Door stove bend is designed for use off a stove where the flue needs to offset across to miss an obstruction. Pennine One 30° Bend No Door Specs Friction Fit (No...£45.61 Inc. VAT£38.01 Ex. VAT -
Pennine One 1000mm Pipe No Door
£44.16 Inc. VAT£36.80 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 1000mm Standard Pipe No Door is designed for use directly off a stove / appliance. Pennine One 1000mm Standard Pipe No Door Specs Friction Fit (No Fire Clay required)...£44.16 Inc. VAT£36.80 Ex. VAT -
1 Piece Offset (50mm)
£92.71 Inc. VAT£77.26 Ex. VATThe 1 Piece Stove Offset (50mm) is designed to give an aesthetically pleasing offset rather than individual parts. This is will offset the pipe by 50mm (2") centre to centre. The offset should only be used to connect from the appliance into an...£92.71 Inc. VAT£77.26 Ex. VAT -
Standard Trim Ring
£27.89 Inc. VAT£23.24 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£27.89 Inc. VAT£23.24 Ex. VAT -
Cut Length Adaptor
£47.34 Inc. VAT£39.45 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£47.34 Inc. VAT£39.45 Ex. VAT -
Standard Tee with Branch Spigot
£106.91 Inc. VAT£89.09 Ex. VATThis Standard Tee with Branch Spigot is a single wall prefabricated pipe designed to connect horizontally off the rear of a stove to turn the flue through 90°, manufactured and coated to the highest standards, made from 1.2mm thick low carbon...£106.91 Inc. VAT£89.09 Ex. VAT -
1200mm Standard Pipe No Door
£103.97 Inc. VAT£86.64 Ex. VATThis 1200mm standard pipe with no door is manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and externally with a ground coat and top coat of high temperature...£103.97 Inc. VAT£86.64 Ex. VAT -
Pennine One 45° Bend No Door
£45.61 Inc. VAT£38.01 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 45° NO Door stove bend is designed for use off a stove where the flue needs to offset across to miss an obstruction. Pennine One 45° Bend No Door Specs Friction Fit (No...£45.61 Inc. VAT£38.01 Ex. VAT -
Pennine One 500mm Pipe No Door
£28.72 Inc. VAT£23.93 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 500mm Standard Pipe No Door is designed for use directly off a stove / appliance. Pennine One 500mm Standard Pipe No Door Specs Friction Fit (No Fire Clay required) Manufactured...£28.72 Inc. VAT£23.93 Ex. VAT -
Standard Tee with Branch Socket
£106.91 Inc. VAT£89.09 Ex. VATThe Standard Tee with Branch Socket is designed with a female socket on the branch to house a draught stabiliser section. Can also be used to connect directly onto the rear of a stove with a larger than usual spigot to prevent excess fire rope being used...£106.91 Inc. VAT£89.09 Ex. VAT -
900mm Standard Pipe No Door
£80.59 Inc. VAT£67.16 Ex. VATThis 900mm standard pipe with no door is a single wall prefabricated pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and externally with a ground coat and top...£80.59 Inc. VAT£67.16 Ex. VAT -
Split Trim Ring
£52.51 Inc. VAT£43.76 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£52.51 Inc. VAT£43.76 Ex. VAT -
Pennine One 45° Bend With Door
£71.78 Inc. VAT£59.82 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 45° WITH Door stove bend is designed for use off a stove where the flue needs to offset across to miss an obstruction, this bend offers the option to sweep and inspect through...£71.78 Inc. VAT£59.82 Ex. VAT -
900mm Coloured Pipe No Door
£63.20 Inc. VAT£52.67 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£63.20 Inc. VAT£52.67 Ex. VAT -
Pennine One 250mm Pipe No Door
£22.09 Inc. VAT£18.41 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 250mm standard stove pipe is designed for use directly off a stove / appliance. Pennine One 250mm Standard Pipe No Door Specs Friction Fit (No Fire Clay required) Manufactured in...£22.09 Inc. VAT£18.41 Ex. VAT -
Angled Trim Ring 45°
£60.54 Inc. VAT£50.45 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£60.54 Inc. VAT£50.45 Ex. VAT -
Pennine One 90° Bend No Door
£45.64 Inc. VAT£38.03 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 90° NO Door stove bend is designed for use off the rear of a stove where the flue needs to turn through 90° and rise vertically up into the chimney stack. Pennine One...£45.64 Inc. VAT£38.03 Ex. VAT -
Pennine One 1000mm Pipe With Door
£70.33 Inc. VAT£58.61 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 1000mm Standard Pipe With Door is designed for use directly off a stove / appliance, this part offers an option to inspect or sweep the flue through the door. Pennine One 1000mm...£70.33 Inc. VAT£58.61 Ex. VAT -
Increasing Flue Liner Adaptor
£55.42 Inc. VAT£46.18 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£55.42 Inc. VAT£46.18 Ex. VAT -
90° Swept Elbow No Door
£95.27 Inc. VAT£79.39 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£95.27 Inc. VAT£79.39 Ex. VAT -
300mm Standard Pipe No Door
£40.98 Inc. VAT£34.15 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£40.98 Inc. VAT£34.15 Ex. VAT -
Flue Liner Adaptor
£47.39 Inc. VAT£39.49 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£47.39 Inc. VAT£39.49 Ex. VAT -
Pennine Systems Tee Cap
£42.50 Inc. VAT£35.42 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£42.50 Inc. VAT£35.42 Ex. VAT -
Pennine One Wall Band (250mm Long)
£24.68 Inc. VAT£20.57 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One Wall Band is designed to support the flue pipe against a nearby wall, installation of the wall band is Done by cutting the wall band support arm down to size and fastening this to...£24.68 Inc. VAT£20.57 Ex. VAT -
Pennine One 90° Trim Ring (1pc)
£26.87 Inc. VAT£22.39 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 90° Trim Ring (one piece) is designed to finish off the Pennine One flue pipe to hide any unsightly hole / cut within the steel register plate, alternatively this product can...£26.87 Inc. VAT£22.39 Ex. VAT -
Pennine One 90° Split Trim Ring (2pc)
£52.34 Inc. VAT£43.62 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 90° Split Trim Ring (two piece) is designed to finish off the Pennine One flue pipe to hide any unsightly hole / cut within the steel register plate, alternatively this...£52.34 Inc. VAT£43.62 Ex. VAT -
Pennine One 90° Bend With Door
£63.65 Inc. VAT£53.04 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 90° WITH Door stove bend is designed to connect off the rear of a stove where the flue needs to turn through 90° and rise vertically into the exsiting chimney stack. ...£63.65 Inc. VAT£53.04 Ex. VAT -
Pennine One 500mm Pipe With Door
£54.82 Inc. VAT£45.68 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 500mm Standard Pipe WithDoor is designed for use directly off a stove / appliance and offers the facility to clean and inspect within the chimney.. Pennine One 500mm Standard Pipe...£54.82 Inc. VAT£45.68 Ex. VAT -
150mm Standard Pipe No Door
£46.38 Inc. VAT£38.65 Ex. VATStove pipe is designed as a connecting flue pipe with high temperature and acid resistant vitreous enamel coating, it is suitable for use on gas, oil and multi fuel appliances up to 50kW output, with a maximum operating flue gas temperature of up to...£46.38 Inc. VAT£38.65 Ex. VAT -
Double Socket Adaptor
£46.82 Inc. VAT£39.02 Ex. VATPremier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and...£46.82 Inc. VAT£39.02 Ex. VAT -
Prima Smooth 0°-90° Adj, Bend
£101.70 Inc. VAT£84.75 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 45° NO Door stove bend is designed for use off a stove where the flue needs to offset across to miss an obstruction. Pennine One 45° Bend No Door Specs Friction Fit (No...£101.70 Inc. VAT£84.75 Ex. VAT
Flue pipes are designed to be a connecting pipe between the stove and chimney. They are coated with high temperature and acid resistant coating to withstand the heat and byproducts of the stove. Vitreous enamel stove flue pipes can be used with wood, gas, oil and multi fuel appliances up to 50kW output. Can handle up to 450°C flue gas temperature.
Twin wall flue systems are safe, reliable and easy fit heating solution for indoor and outdoor installations, for wood burning stoves, gas coal effect fires, oil appliances and boilers.
However vitreous enamel pipe should only be used to connect the appliance to an existing lined chimney or a class 1 twin-wall insulated stainless steel chimney and twin-wall flue. Never use a flue pipe through a combustible floor, externally or to line an existing chimney stack as this could be dangerous. So what makes top quality wood stove flue pipes worth the investment? The vitreous enamel stove pipe is a essential part of any wood burner, multi fuel stove or wood burning fireplace installation. It is the pathway for the exhaust gases, smoke and byproducts of stove combustion to escape into the outside air. A good stove flue pipe allows your appliance to burn efficiently and reduce indoor air pollution. Also a stove pipe allows proper ventilation for the fire as it heats your home.
At Nationwide Chimney Components we stock only the best quality vitreous enamel flue pipes. When you buy from us you can be sure you are investing in a durable long lasting stove pipe that will keep your wood burning stove safe and healthy.