This 1 Piece Offset (100mm) is a single wall prefabricated pipe designed to give an aesthetically pleasing offset rather than individual parts. This is will offset the stove pipe by 100mm (4") centre to centre. Its manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and externally with a ground coat and top coat of high temperature resistant acid resistant vitreous enamel coating. Due to the chemical specification of the steel used for this product it provides an excellent surface for the glass coating to adhere to offering a superior finish to other manufacturers. It is suitable for use on gas, oil and multi fuel appliances up to 50kW output, with a maximum operating flue gas temperature of up to 450°C. The offset should only be used to connect from the appliance into an existing lined chimney, or alternatively a class 1 twin wall insulated stainless steel chimney. Under NO circumstances is stove pipe to be used through a combustible floor, externally or to line an existing chimney.
1 Piece Offset (100mm) Features
- Liner Thickness:- 1.2mm
- CE Approval:- EN1856-2 T600 N1 D VM L80120 G525
- Continuous Firing Temp:- 450°C
- Manufactured to:- BS 6999:1989 BSRIA Report No. 17721/3
- Enamel Heat Tested to:- BS1344 Part 1:1994 / Part 7:1984
- Acid Resistance Tested to:- BS EN 14483-1:2004