Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel. All components are coated both internally and externally with a ground coat and top coat of high temperature resistant acid resistant vitreous enamel coating. Due to the chemical specification of the steel used for this product it provides an excellent surface for the glass coating to adhere to offering a superior finish to other manufacturers.
Stove pipe is designed as a connecting flue pipe with high temperature and acid resistant vitreous enamel coating, it is suitable for use on gas, oil and multi fuel appliances up to 50kW output, with a maximum operating flue gas temperature of up to 450°C.
Stove pipes should only be used to connect from the appliance into an existing lined chimney, or alternatively a class 1 twin wall insulated stainless steel chimney. Under NO circumstances is stove pipe to be used through a combustible floor, externally or to line an existing chimney
- Liner Thickness:- 1.2mm
- CE Approval:- EN1856-2 T600 N1 D VM L80120 G375
- Continuous Firing Temp:- 450°C
- Manufactured to:- BS 6999:1989 BSRIA Report No. 17721/3
- Enamel Heat Tested to:- BS1344 Part 1:1994 / Part 7:1984
- Acid Resistance Tested to:- BS EN 14483-1:2004
Product Features:- Designed to make any holes cut in register plates neat and tidy, for use in 0° and 90° orientations and supplied in two pieces for easy of installation.