Frequently bought together:
Description
The 150 degree bend no door is a single-wall vitreous enamel stove pipe bend for use within a connecting flue pipe system. Manufactured from 1.2mm low-carbon steel, it is coated internally and externally with high-temperature, acid-resistant vitreous enamel for a durable stove pipe finish.
This bend is suitable for gas, oil, and multi-fuel appliances up to 50kW, with a maximum operating flue gas temperature of 450°C. It should only be used to connect an appliance to an existing lined chimney or class 1 twin-wall insulated stainless steel chimney, and must not be used externally, through combustible floors, or to line an existing chimney stack.
- Liner Thickness:- 1.2mm
- CE Approval:- EN1856-2 T600 N1 D VM L80120 G375
- Continuous Firing Temp:- 450°C
- Manufactured to:- BS 6999:1989 BSRIA Report No. 17721/3
- Enamel Heat Tested to:- BS1344 Part 1:1994 / Part 7:1984
- Acid Resistance Tested to:- BS EN 14483-1:2004
Related Products
Related Products
Premier Flue 150° Bend With Door
Premier Flue
£93.65
Inc. VAT
£78.04
Ex. VAT
Premier Flue Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel...
15 Degree Bend
Schiedel
£122.94
Inc. VAT
£102.45
Ex. VAT
This 15 degree bend component is used to create an offset, this can be used with other elbow components to create a bigger offset. Building an effective twin wall system relies on the quality of the...
45 Degree Bend
Schiedel
£122.94
Inc. VAT
£102.45
Ex. VAT
This 45 Degree Bend component is used to create an offset of 45° , or this can be used with other elbow components to create a bigger offset. NCC stock a wide range of high quality components so...
30 Degree Bend
Schiedel
£122.94
Inc. VAT
£102.45
Ex. VAT
This component is used to create an offset of 30 degree, or this can be used with other elbow components to create a bigger offset. Twinwall insulated elbows and bends can be used either...
90 Degree Bend
Schiedel
£143.77
Inc. VAT
£119.81
Ex. VAT
This 90 Degree Bend is used in pairs to provide an offset of 30°
90 Degree Bend Features