Twin Wall Tees

Twin Wall Tees

If it's pipe tees you're after, explore this range below! We got plenty of variations for twin wall wood burning stove installations including draught stabilisers and tee plugs. Whatever tee you need for your installation, you can rely on us to provide the right parts at the right prices.

  • 135° Tee including Drain Cap

    135 Degree Tee including Drain Cap

    £230.03 Inc. VAT
    £191.69 Ex. VAT
    This 135 Degree Tee including Drain Cap is used in combination with a 45 degree elbow to connect from the connecting flue pipe to the vertical chimney. It provides the least resistance to the flow of the flue gases. NCC stock a huge range of parts and...
    £230.03 Inc. VAT
    £191.69 Ex. VAT
  • 90° Tee including Drain Cap

    90 Degree Tee including Drain Cap

    £238.75 Inc. VAT
    £198.96 Ex. VAT
    90 Degree Tee including Drain Cap for dry applications only. This item is used to connect from the connecting flue pipe to the vertical system chimney at 90 Degrees. Or the branch may be used to connect to a draught stabiliser. NCC pride themselves in...
    £238.75 Inc. VAT
    £198.96 Ex. VAT
  • Tee Plug with Drain

    Tee Plug with Drain

    £39.41 Inc. VAT
    £32.84 Ex. VAT
    This item is used at the base of the vertical chimney to provide a drain off point for rainwater and condensate. It also provides inspection or cleaning access. It may be used in both dry and wet conditions and on both positive and negative pressure...
    £39.41 Inc. VAT
    £32.84 Ex. VAT
  • Insulated Tee Plug with Drain

    Insulated Tee Plug with Drain

    £95.74 Inc. VAT
    £79.78 Ex. VAT
    This Insulated Tee Plug with Drain is used at the base of the vertical chimney to provide a drain off point for rainwater and condensate. It also provides inspection or cleaning access. It may be used in both dry and wet conditions and on both...
    £95.74 Inc. VAT
    £79.78 Ex. VAT
  • Draught Stabiliser

    Draught Stabiliser (Twin Wall)

    £79.73 Inc. VAT
    £66.44 Ex. VAT
    The Draught Stabiliser Section is installed where there is excessive draught on a system. This is connected onto the system usually onto a 90° tee.
    £79.73 Inc. VAT
    £66.44 Ex. VAT