Twin Wall Flue
Twin wall flues are specialised insulated chimney systems designed for use with open or closed solid fuel stoves, including condensing and oil fired appliances. They can withstand continuous operating temperatures of up to 450°C and are perfect for heating appliances such as wood-burning stoves, gas coal effect fires, and oil boilers. These flues are ideal for new build projects and renovations as they are a simple, cost-effective solution for those without a brick chimney stack or an existing chimney stack, allowing for the installation of a stove in almost any room. Take a look at our article on fitting a twin wall system. We offer a wide range of chimney flue supplies, including chimney cowls, chimney liner, and flexible flue liner, to ensure your system is complete.
Nationwide Chimney Components only supplies premium, high-quality twin wall flue systems and twin wall flue pipes, including stove pipe, to meet your heating needs. Our twin-walled flue products include pipes with adjustable lengths, making them suitable for indoor and outdoor flues and biomass boiler installations. These products have a simple twist-lock bayonet jointing system and are available in high-grade stainless steel finish or black twin wall flue pipe in all sizes. They are also HETAS-approved, ensuring that they meet building regulations. Additionally, we provide all necessary flue installation materials, compatible with multi fuel stoves, to facilitate a smooth and compliant installation process.
PLEASE NOTE DIAMETERS 180mm & 200mm ARE NO LONGER AVAILABLE IN SCHIEDEL’S ICID RANGE
-
960mm Effective Length
£143.77 Inc. VAT£119.81 Ex. VAT960mm Effective Length are used to make up spaces in order for the system to operate. The chimney flue pipe lengths can be applied either vertically or horizontally. The shorter chimney pipe lengths are great for making up spaces in tight room areas...£143.77 Inc. VAT£119.81 Ex. VAT -
Structural Locking Band
£27.62 Inc. VAT£23.02 Ex. VATThe Structural Locking Bands are purchased separately. It is used instead of a standard locking band in a situation where extra structural support is required. For example, where the chimney is 1.5m above the last support or above the roof. This also...£27.62 Inc. VAT£23.02 Ex. VAT -
Wall Band (60mm)
£26.30 Inc. VAT£21.92 Ex. VATThis Wall Band (60mm) is used to fix the chimney to a supporting wall and provides lateral support only at a fixed distance of 60mm off a wall.£26.30 Inc. VAT£21.92 Ex. VAT -
Structural Locking Band for Bends
£10.40 Inc. VAT£8.67 Ex. VATThis item provides a locking mechanism for ICID bends. The Twist-lock bayonet jointing system for ICID systems is secured by this structural locking band.£10.40 Inc. VAT£8.67 Ex. VAT -
45 Degree Bend
£122.94 Inc. VAT£102.45 Ex. VATThis 45 Degree Bend component is used to create an offset of 45° , or this can be used with other elbow components to create a bigger offset. NCC stock a wide range of high quality components so you can be sure your purchasing the very best...£122.94 Inc. VAT£102.45 Ex. VAT -
1460mm Effective Length
£213.24 Inc. VAT£177.70 Ex. VAT1460mm Effective Lengths are used to make up spaces in order for the system to operate. The chimney flue pipe lengths can be applied either vertically or horizontally. The shorter chimney pipe lengths are great for making up spaces in tight room...£213.24 Inc. VAT£177.70 Ex. VAT -
Raincap with 25mm Anti-bird Mesh
£90.26 Inc. VAT£75.22 Ex. VATThis Raincap with 25mm Anti-bird Mesh is used to terminate the system and also prevents ingressive rain entering it. This item is supplied with 25mm square mesh to prevent birds from nesting. Raincap features Twist-lock bayonet jointing...£90.26 Inc. VAT£75.22 Ex. VAT -
Insulated Appliance Connector (Closed)
£62.51 Inc. VAT£52.09 Ex. VATThe ICID Insulated Appliance Connector is used to push into the appliance spigot with the male collar pointing upwards. It is used on solid fuel appliances and is sealed to the appliance with fire rope and fire cement or high temperature sealant to...£62.51 Inc. VAT£52.09 Ex. VAT -
Roof Support
£79.10 Inc. VAT£65.92 Ex. VATThis item is used to provide the chimney with lateral support as it passes through the roof space. The band is tightened around the chimney and the side plates are rotated and fixed to the roof trusses to suit the angle. Specially engineered Pre drilled...£79.10 Inc. VAT£65.92 Ex. VAT -
460mm Effective Length
£102.11 Inc. VAT£85.09 Ex. VAT460mm Effective Length are used to make up spaces in order for the system to operate. The chimney flue pipe lengths can be applied either vertically or horizontally. The shorter chimney pipe lengths are great for making up spaces in tight room areas...£102.11 Inc. VAT£85.09 Ex. VAT -
2 Piece Trim Collar 45 Degree
£45.38 Inc. VAT£37.82 Ex. VATThe trim collars are used to give an aesthetic finish where the chimney penetrates the wall of a building. The 45 version should be used in combination with a 45 tee connection. NCC only stock the very best chimney and flue components so you can be sure...£45.38 Inc. VAT£37.82 Ex. VAT -
Res-Lead Master Flash
£119.95 Inc. VAT£99.96 Ex. VATThis Res-Lead Master Flash is designed for use on concrete or profile tiled roofs where standard aluminium flashing simply can't shape around the wave or step in decorative roof tiles. The base is manufactured from an Environmentally safe...£119.95 Inc. VAT£99.96 Ex. VAT -
£62.95 Inc. VAT£52.46 Ex. VAT
-
Flat Roof Flashing Kit
£94.61 Inc. VAT£78.84 Ex. VAT95530180 Aluminium Base and Aluminium Upstand Flashing Kit Stainless Steel Storm Collar Supplied as Part of Kit Designed for Flat Felt Roofs or Sarnafil Roofs Suitable for Flat Roofs Only£94.61 Inc. VAT£78.84 Ex. VAT -
750mm Effective Length
£118.10 Inc. VAT£98.42 Ex. VATEffective Chimney Pipe Lengths are used to make up spaces in order for the system to operate. The chimney flue pipe lengths can be applied either vertically or horizontally. The shorter chimney pipe lengths are great for making up spaces in tight room...£118.10 Inc. VAT£98.42 Ex. VAT -
£50.34 Inc. VAT£41.95 Ex. VAT
-
Storm Collar Flat
£59.44 Inc. VAT£49.53 Ex. VATThis Storm Collar Flat is used with a flashing kit to add additional protection against the ingress of rainwater.£59.44 Inc. VAT£49.53 Ex. VAT -
Anti-downdraught Terminal
£114.46 Inc. VAT£95.38 Ex. VATThis item is used to terminate an installation and provides protection to avoid rainwater from entering the chimney system, whilst minimising problems associated with downdraught. Care should be taken to ensure that the chimney is cleaned regularly...£114.46 Inc. VAT£95.38 Ex. VAT -
Rectangular Ventilated Firestop Plate - 2 Piece
£56.26 Inc. VAT£46.88 Ex. VATRectangular Ventilated Firestop Plate – ICS Firestop components. ICS is converted into ICS Plus by adding a lip seal to each component with a male form on the liner. This creates a twin wall insulated chimney system designed for the new...£56.26 Inc. VAT£46.88 Ex. VAT -
1 Piece Trim Collar 45 Degree
£52.67 Inc. VAT£43.89 Ex. VAT1 Piece Trim Collar 45 Degree are fitted around the Eco ICID pipe where it protrudes through both the inside and the outside of the wall at 45 degrees. They provide a more aesthetic finish when installed on site. 1 Piece Trim Collar Features ...£52.67 Inc. VAT£43.89 Ex. VAT -
£35.26 Inc. VAT£29.38 Ex. VAT
-
Telescopic Pipe - 2 Piece 350-570mm
£168.02 Inc. VAT£140.02 Ex. VATAdjustable Telescopic Pipes are used with standard components to achieve an exact length on site and avoid on-site cutting of components. This length could also be used in starter sections to remove the appliance without removing the full system, for...£168.02 Inc. VAT£140.02 Ex. VAT -
Draught Stabiliser (Twin Wall)
£93.66 Inc. VAT£78.05 Ex. VATThe Draught Stabiliser Section is installed where there is excessive draught on a system. This is connected onto the system usually via a 90° tee.£93.66 Inc. VAT£78.05 Ex. VAT -
135° Tee including Drain Cap
£349.96 Inc. VAT£291.63 Ex. VATThis 135° Tee including Drain Cap is used in combination with a 45 degree elbow to connect from the connecting flue pipe to the vertical chimney. It provides the least resistance to the flow of the flue gases. NCC stock a huge range of parts and...£349.96 Inc. VAT£291.63 Ex. VAT -
160mm Effective Length
£58.12 Inc. VAT£48.43 Ex. VAT160mm Effective Length are used to make up spaces in order for the system to operate. The chimney flue pipe lengths can be applied either vertically or horizontally. The shorter chimney pipe lengths are great for making up spaces in tight room areas...£58.12 Inc. VAT£48.43 Ex. VAT -
Residential Master Flash (Aluminium Base)
£32.21 Inc. VAT£26.84 Ex. VATThe Residential Master Flash is an aluminium flashing with a rubber up stand that can be used on flat tiled or slated roofs. The Residential Master Flash incorporates an angled up stand which is designed for roof pitches between...£32.21 Inc. VAT£26.84 Ex. VAT -
Raincap Without Mesh
£76.40 Inc. VAT£63.67 Ex. VATThis item is used to terminate the system and also prevents ingressive rain entering it. It has a number of features: Twist-lock bayonet jointing system. Low external case temperature. ICID corrosion tested with designation V2/V3.£76.40 Inc. VAT£63.67 Ex. VAT -
1 Piece Trim Collar 90 Degree
£43.18 Inc. VAT£35.98 Ex. VATThe 1 Piece Trim Collar 90 Degree are used to give an aesthetic finish where the chimney penetrates the wall of a building. The 90 version is used on horizontal penetrations with a 45 version being used in combination with a 45 tee connection. 1...£43.18 Inc. VAT£35.98 Ex. VAT -
Wall Sleeve 45°
£70.22 Inc. VAT£58.52 Ex. VATA Wall Sleeve to suit a 45° angle through a Masonry and Timber Wall.£70.22 Inc. VAT£58.52 Ex. VAT -
£70.86 Inc. VAT£59.05 Ex. VAT
-
Appliance Connector (Open)
£41.70 Inc. VAT£34.75 Ex. VATThe ICID Insulated Appliance Connector is used to push into the appliance spigot with the male collar pointing upwards. It is used on solid fuel appliances and is sealed to the appliance with fire rope and fire cement or high temperature sealant to...£41.70 Inc. VAT£34.75 Ex. VAT -
Guy Wire Bracket
£32.42 Inc. VAT£27.02 Ex. VATThis Guy Wire Bracket is used to provide an unsupported chimney with lateral support above roof level. It should be used in conjunction with guy wires or with rigid stays (provided by others) which should be attached to the bracket and then secured...£32.42 Inc. VAT£27.02 Ex. VAT -
Magentic Firestop Cover Plate Kit
£48.08 Inc. VAT£40.07 Ex. VATThis Magentic Firestop Cover Plate Kit is a new addition to the ventilated firestop range has been introduced an aesthetic cover plate kit, which fastens to the standard ventilated firestops using the magnets which are provided in the kit along with...£48.08 Inc. VAT£40.07 Ex. VAT -
Round Ventilated Firestop Plate - 2 Piece
£64.32 Inc. VAT£53.60 Ex. VAT9424B0200/127228 Round Ventilated Firestop Plates 2PC – ICS Firestop components. ICS is converted into ICS Plus by adding a lip seal to each component with a male form on the liner. This creates a twin wall insulated chimney system designed for the...£64.32 Inc. VAT£53.60 Ex. VAT -
Insulated Appliance Connector
£92.68 Inc. VAT£77.23 Ex. VATThe ICID Insulated Appliance Connector is used to push into the appliance spigot with the male collar pointing upwards. It is used on solid fuel appliances and is sealed to the appliance with fire rope and fire cement or high temperature sealant to...£92.68 Inc. VAT£77.23 Ex. VAT -
Ventilated Support Plate - 2 Piece
£105.16 Inc. VAT£87.63 Ex. VATVentilated Support Plate – Designed to support the twin wall flue system as it passes through a combustible floor.£105.16 Inc. VAT£87.63 Ex. VAT -
£29.72 Inc. VAT£24.77 Ex. VAT
-
Adjustable Trim Collar 20-35 Degree
£43.54 Inc. VAT£36.28 Ex. VATThe Adjustable Trim Collar 20-35 Degree provides a flexible way of giving an aesthetically pleasing finish to any chimney flue system. These are lightweight and easy to fit£43.54 Inc. VAT£36.28 Ex. VAT -
Adjustable Trim Collar 35-45 Degree
£44.56 Inc. VAT£37.13 Ex. VATThis Adjustable Trim Collar 35-45 Degree provides a flexible way of giving an aesthetically pleasing finish to any chimney flue system.They are very lightweight and easy to fit.£44.56 Inc. VAT£37.13 Ex. VAT -
Top Plate
£122.94 Inc. VAT£102.45 Ex. VATThe top plate ICID plus is designed to be used internally or externally to provide either initial or intermediate support for the vertical chimney. It is used in combination with side plates or with cantilever brackets. Top Plate benefits ...£122.94 Inc. VAT£102.45 Ex. VAT
The external diameter of double-walled flues is 60 mm more than the inside diameter. So, a 150 mm pipe has an outer diameter of 210 mm. Our twin wall flues can pass through floors, roofs, or walls, depending on your required flue route. We stock the Schiedel flue system and are one of the UK’s leading providers of flue supplies and flue liners, including chimney cowls, chimney liner, and flexible flue liner. We also offer a comprehensive range of flue installation materials, ensuring compatibility with multi fuel stoves and ease of installation for both existing chimney and new constructions without an existing chimney stack.
When installing a twin wall insulated flue system, it is essential to contact a HETAS approved tradesperson to ensure that your flue system is fitted correctly and meets building regulations. At Nationwide Chimney Components, we are committed to providing our customers with the highest quality twin wall flue products and services to ensure a safe and efficient heating system.