Pennine One Bends
NCC has a great selection of Pennine One Bends available, all our bends are manufactured and tested to the very highest standards, so you have peace of mind that you are buying a durable, long lasting quality product. Single Wall stove pipe is the standard for venting heating stoves. Stovepipe is used to vent the stove's exhaust out of the living space and into a chimney liner or chimney system. This is commonly called a connector pipe. For use as flue stove connection for domestic and commercial heating appliances to flue/chimney. Suitable for oil, gas and Solid Fuels. Available as straight lengths bends (elbows) & Tees with fittings and accessories.
-
Pennine One 30° Bend No Door
£45.61 Inc. VAT£38.01 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 30° NO Door stove bend is designed for use off a stove where the flue needs to offset across to miss an obstruction. Pennine One 30° Bend No Door Specs Friction Fit...£45.61 Inc. VAT£38.01 Ex. VAT -
Pennine One 45° Bend No Door
£45.61 Inc. VAT£38.01 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 45° NO Door stove bend is designed for use off a stove where the flue needs to offset across to miss an obstruction. Pennine One 45° Bend No Door Specs Friction Fit...£45.61 Inc. VAT£38.01 Ex. VAT -
Pennine One 45° Bend With Door
£71.78 Inc. VAT£59.82 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 45° WITH Door stove bend is designed for use off a stove where the flue needs to offset across to miss an obstruction, this bend offers the option to sweep and inspect...£71.78 Inc. VAT£59.82 Ex. VAT -
Pennine One 90° Bend No Door
£45.64 Inc. VAT£38.03 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 90° NO Door stove bend is designed for use off the rear of a stove where the flue needs to turn through 90° and rise vertically up into the chimney stack. Pennine...£45.64 Inc. VAT£38.03 Ex. VAT -
Pennine One 90° Bend With Door
£63.65 Inc. VAT£53.04 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 90° WITH Door stove bend is designed to connect off the rear of a stove where the flue needs to turn through 90° and rise vertically into the exsiting chimney stack...£63.65 Inc. VAT£53.04 Ex. VAT -
Prima Smooth 0°-90° Adj, Bend
£101.70 Inc. VAT£84.75 Ex. VAT***This item will ONLY fit to Pennine One products*** The Pennine One 45° NO Door stove bend is designed for use off a stove where the flue needs to offset across to miss an obstruction. Pennine One 45° Bend No Door Specs Friction Fit (No...£101.70 Inc. VAT£84.75 Ex. VAT